Views: 55 Author: Site Editor Publish Time: 2022-09-08 Origin: Site
A wheelchair handbikegenerally has three wheels in structure, which are transmitted by a manual device to the driving wheels to make it move. A wheelchair is an important tool for rehabilitation. Wheelchair handbikes are small indoor and outdoor transportation tools for the disabled and those with mobility difficulties. Existing wheelchairs, especially manual wheelchairs used by the physically disabled and the elderly, are mostly manual wheelchairs.
Here is the content list:
l Wheelchair handbike surface requirements
l Wheelchair handbike driving braking distance standard
l Packaging, transportation, and storage of wheelchair handbike
The outer surface of parts: all outer surfaces of the wheelchair handbike that can be touched by hands should be flat and smooth, free of sharp edges, burrs, sharp corners, etc., and caps should be added to the end of each nozzle. Chrome-plated parts: The wheelchair handbike main surface should be free of obvious defects such as blistering, pores, roughness, cracks, and missing plating. Galvanized parts: The main surface should be smooth, free of dripping, rough and thorny zinc, no peeling, and no residual solvent residue. Wheelchair handbike’s anodized parts: The main surface should have a uniform color, no color difference, and no visible defects. Painted surface: It should be flat and smooth, with a wheelchair handbike’s a uniform color, no bottoming, blistering, peeling, cracking, and no obvious scratches or bruises. Wheelchair handbike’s welding surface: it should be smooth and flat, free of weld bumps or pits, uniform welding seam, and free of defects such as pores, cracks, slag inclusions, burn-through, etc.
The driving braking distance of a manual wheelchair handbike should not be greater than 1.5m. The whole vehicle falls freely at a height of 400mm without damage to parts and deformation of the body. The weight is 25kg, and the 0.5kg seat falls freely from a height of 250mm to the seat part without significant deformation. The seat (back) cushion of the manual wheelchair should not produce progressive smoldering and flame burning during the test.
The packaging box of the Wheelchair handbike should be firm and reliable, and the signs should be clear and comply with the provisions of GB191. The outside of the packaging box should be marked with the product name, trademark, quantity, net weight, gross weight, and box size, and signs such as upwards, fear of humidity, and handle with care. The transportation and transportation requirements are in accordance with the regulations of the order. The manual wheelchair after storage and packaging should be stored in a dry and ventilated place with a canopy and should be separated from corrosive chemicals such as acids and alkalis. And pay attention to take necessary moisture-proof and rust-proof measures.
It is the responsibility of each manufacturer to produce wheelchair handbike that meets the standards to ensure the safe travel of people with disabilities. Wisking healthcare Corporation conducted a large number of connection tests on wheelchair handbike before leaving the factory, and the quality assurance rate was guaranteed. If you are in the wheelchair handbike business, you can consider using our cost-effective products.